Thinking on the design of a particular home room. It is important to pay attention to even seemingly insignificant details, for example, door handles. After all, all the perception of the interior is built on such details in general, besides, door handles are often acquired for a long period of time, which means that they need to be approached more than responsibly. If you are an urgent lover of all non-standard, then you will like this review, because today we will show the most unusual door handles, designed to decorate not only the door itself, but the whole interior of the house as a whole.

Do you know that the Italians first came up with a door handle with a tongue, developing her mechanism so that when pressing the knob, the tongue was hidden, but when releasing it was shown.

According to statistics, door handles are the most imperceptible details in the interior, and if they are noticed, they immediately forget, but this statement applies only to ordinary non-spoken hands, and the original door handles are a kind of anchor, for which the person is clinging. Thanks to its non-standard appearance, such a door fittings rushes in the eye, which means it is impressive and remembered.

But this door fittings and the reverse side have, because the incorrectly chosen handle is able to spoil the entire design of the room as a whole, and here it is already out of the invisible turns into a tasteless and catchy. Under the incorrectly selected accessory implies the inconsistency of its color with the rest of the range of the room, as well as stylistic subtext. So for example, in the interior of the baroque decorated in black and gold, the modest straight handle of silver color will look at the black and gold, the gold-plated accessories with elements of thread or forging is suitable.

Unusual door handles, photos.

The process of manufacturing decorative door handles:

The choice of such a necessary door fittings should proceed from the overall style of premises, from hobbies of owners, as well as their overall emotional mood. So for example, people with an excellent sense of humor can buy hands in the form of a head of a clown, a pistol or an elongated hand, animal lovers can pay attention to the accessories in the form of cats, mice, dogs or frogs. Adventure lovers can pay attention to the handles in the form of ships, scrolls, hourglass or globe. Connoisseurs of ethnic interiors will interest the fittings in the form of an elephant head, the Body of Jaguar, the bamboo bamboo, etc.

Unusual door handles will help favorably beat the interior idea, bring fresh notes in the design of the room, and the interroom or entrance door from a very mediocrous will turn into a bright and memorable.

The site "Decorol" offers its readers to issue a subscription to receive a news, the subscription form is in the Sidebar.

In any residential room, even in a studio studio, there are at least two doors - entrance and interior bathroom. Sliding types of interior doors can do without door handles, but for hinged doors on the loop, the presence of the handle is necessary. Door accessories - one of those low-job details that form the interior and make it finished. Try to put a handle that does not fit the style - and you will see that it can spoil the entire setting as a whole. So door handles are not only the necessary functional, but also an important decorative element of both the interior and exterior of the entrance to the house or apartment.

Types of door handles

Standard models or you choose unusual door handles, it is important to know the main types of classification that will help determine the choice of door fittings.

First of all, door handles can be divided into destination:

• entrance;
• interroom.

It's obvious that entrance door handles First of all, it should be reliable, strong and durable, because they are entrusted with an important role. In design interior door handles More attention is paid to beautiful appearance. Although nothing interferes with the input handles to have an original appearance, a non-standard form or painting.

Depending on the design door handles come:

• stationary;
• fale moving with a latch.

Stationary handles Not related to the lock and do not have a rotary mechanism. They are needed solely in order to pull and open / close the door. Most often, stationary handles are made in the form of a bracket, but other forms are also used.

Movable handles, in turn, have two types - swearing (they are also called KNOG - from English. Knob) and pressure. Rotary knoby look like a small ball-knobs with a lock or latch in the middle, which open the door with a simple turn. Such handles often have the ability to block the door opening, so they are installed mainly in the bathrooms and rooms, where the owner needs a personal space.

Popular pens, which are a lever, pressing the fault latch and opens the door.

Door handles are also accepted to separated by manufacturing material.

Wooden handles Make solid wood, often valuable. Wooden handles look excellent. They can be decorated with threads, inlaid inserts, and just the natural texture of the tree will be an excellent decoration for both input and interior doors. It is worth remembering that many wooden handles are not intended for use in a wet room, so it is necessary to refuse to install them in the bathroom.

Metal door handles Made from different alloys, depending on which their operational characteristics can differ greatly. Brass handles are most highly popular, as brass is resistant to temperature and humidity drops, extensively carry heavy loads, and is also very pleasant to the touch. Aluminum or stainless steel knobs are not as strong, but many appreciate chrome or nickel-plated handles for their aesthetic appearance. Due to the peculiarities of different metal alloys, designers have tremendous opportunities to experiment with the appearance of the handles, to make them "under ancient" or in the ultra-modern style of Hi-tech.

Combined door handles There are several materials in themselves, for example, there are rotary shoes with a bowl of Murano glass, wooden handles with inserts from natural stone, metal pressure handles with crystals and so on. Most often, such an exclusive door fittings belongs to the luxury class.

Of course there are and plastic Door Handlesusually interroom. High-quality certified plastic can have excellent performance and live long without breakdowns and scuffs. But from cheap plastic door handles it is better to refuse immediately.

Unusual door handles

Door handle design is not limited to three popular styles: classic, retro and modern. In the accessories industry for doors, there are also trendy directions and trends, unusual inventions and art objects. Manufacturers of door handles in collaboration with famous world designers create unique models, often in a single instance. But simple artisans and small workshops often place unusual door handles that are pleasantly surprised and delight.

Door handles - the first thing we touch, entering the house. Therefore, it is very natural to make this door accessory in the form of a hand. Then guests will begin a visit to you with a handshake!

The tradition of attaching some animals, chimer and legendary creatures to the door handles is happening since the Middle Ages. Now you can also find forged unusual door handles stylized under Gothic. But the door handles from everyday items, for example, from spoons or cycling parts look very original and outgrowfully.

• Read more about.

Round door handles from Bohemian or Murano glass look gorgeous! For the children's room, Knob can be stylized under a football or basketball ball.

The model is not for nervous! The door opens only after pressing the pistol trigger.

Door handles can be used to leave notes.

Very useful improvement of door accessories was equipped with their lighting function.

In this model you can even remove the flashlight from the door handle!

Modern technical progress made it possible to create handles for doors with electronic filling. LCD screen handles will show time, air temperature on the street, signaling that it is time to go to work, as well as welcome the name of family members. Managing such a lock can be performed using a smartphone.

For lovers to stay alone there are door handles with a code lock or handles that are hiding. No one can get into your room without permission!

The choice of interroom and entrance doors, as well as door fittings - the task is not a lung. If you decide to buy entrance doors, pay attention to http://doorsmsk.ru/shop/dveri-v-kvartiru, where you will probably choose the option suitable for your home.

Wooden door handles for premises of various purposes are sufficiently expensive. The high price is due to the use of manual labor and the originality of execution. The design itself does not differ in particular difficulty, and you can make it yourself. The article indicates the advantages and disadvantages of wood models, as well as various technologies for creating door accessories personally.

1. How to make a handle for the door with your own hands: Carved model
   • Tools and materials
   • Making and mounting
2. Wooden handles for doors do it yourself: photo ideas

Features of wooden door handles

From a long time, the accessories for the doors was made of wood. Later, a decent competition was made by metal products and elements made of modern materials. However, today, wooden models are widely popular due to their advantages:

1. Qualitatively polished and treated wood - pleasant to the touch. The wood handle is not so cold as made of metal or plastic.
2. Wood fittings are indispensable for the arrangement of baths and saunas. Wooden elements are not heated to high temperatures, like metal, and the probability of getting a burn when contacting the handle is reduced to zero.
3. Simplicity of the manufacture of handles for the wood door with their own hands. Wood is simple in processing, and working with it does not require expensive equipment. Using bars, rail or log cabins will create a design of any form.
4. Available cost.

Despite the significant advantages, wooden products have some drawbacks:

1. The strength characteristics of wood are inferior to metal elements. This fact must be considered when the construction is erected, which is subjected to significant loads. In this case, it is better to give preference to solid wood or metal.
2. With long-term contact with metal surfaces, the tree is destroyed. Therefore, door handles are desirable to choose in accordance with the material manufacturing material.
3. So that the handle from the wood served for a long time, it should be carefully processed: pollipate and impregnate with protective compositions.

Wood selection for handle making

Accessories mounted on entrance doors must be performed from strong tree species. Some experts recommend using coniferous, which, when heated, highlights a pleasant and healthy fragrance for human health. However, hard-rigid rocks that differ in elegant texture pattern and good mechanical resistance are equally in demand.

Council. Door handles are better made of deciduous trees, so that when capturing the hands there is no resin.

For the manufacture of handles on the door with their own hands fit:

1. Oak - characterized by strength, resistance to external influences and hardness. Oak products look respectable and noble, well suited for the arrangement of country cottages and apartments.
2. Beech is a valuable breed, similar to many qualities with oak. Wood has an unusual pinkish shade of homogeneous texture.
3. Poplar - has vividly pronounced bactericidal properties, so that it is often used when making a pair.
4. Lipa - has an anti-inflammatory and soothing effect on the human body.

How to make a handle for the door with your own hands: Carved model

Tools and materials

Creating a carved model of the door handle involves the use of the following materials and tools:

• wooden flat blank;
• branch of unusual shape;
• saw and electric jigsaw;
• milling mill and nozzle;
• drill;
• sandpaper or grinding machine;
• clamp;
• epoxy adhesive;
• braided;

Making and mounting

Sequence of creating a door handle:

Simple Wooden Handle Bath

The homemade door handle will surprise the guests of the bathhouse and will be the pride of the residents of the steam. Making a simple model will not be much difficulty. Consider an example of creating a handle with a length of 26 cm and a height - 10 cm. To work it will take the board with dimensions of 26 * 10 * 5 cm, a simple pencil and an electrolovka.

Algorithm of actions:

Door handle in Russian folk style

A copy of the carved handle will harmoniously fit into the interior, designed in traditional folk style. The handle will beautifully complement the door stylized under the ancient. Model design includes 6 items:

• base;
• intermediate bars - 2 pcs.;
• cubes - 2 pcs.;
• lever.

First you need to prepare each detail separately, adjust them between themselves and polish. Production Procedure:

Excided Wooden handle for doors do it yourself

For the manufacture of an accurate handle for interior doors, you will have to master the skills of working on the lathe. Creating a similar model requires the use of the following tools and materials:

• machine with three-tailed cartridge;
• oak bar;
• wood cutters;
• large and medium-sized sandpaper;
• wax mastic.

Sequencing:

1. Prepare a blank. Square cross section slice a little on the edges on one side. Thus, the rounded part is evenly fixed in the cartridge of the machine.
2. Insert the workpiece into the cams and with the help of a semicircular cutter give it a cylindrical shape along the entire length.
3. Align the surface of the cutter bar, while holding it under a slight inclination.
4. The sharp edge of the cutter give the shape of the top of the handle.
5. To retreat some distance from the edge and pull out the base, the rear of which will lay down to the door canvase.
6. Control the base of the handle by direct cutter, and the surface to handle the sandpaper. Performing grinding is important not to overdo it and not too pressing on paper, otherwise you can burn your fingers about rotating elements and spoil the product.
7. Cove the handle with wax mastic. The agent penetrates the pores of the wood, protecting the material from external influences and giving the handle a matte shine.
8. Cut the cutter to cut off the handle from the rest of the unprocessed timber.
9. Run the handle in the door.

In the process of manufacture, some nuances should be taken into account:

• for processing, it is necessary to take the material without cracks and bitch, otherwise, when rotating, the billet can split and cause injury;
• from one billet, it is advisable to produce several handles at once, since the exact models are small;
• before grinding and impregnating protective makeup, all minor slits on the handle should be filled with a putty, designed for wood work.

Installing the handles on interior doors

The insertion of the handles in the interior doors begins with their own hands from the markup of the location of the fittings. According to the established standards, the standard door handle is mounted at an altitude of 80-100 cm from the floor (depends on the growth of residents). Works are performed in such a sequence:

1. On the door canvase, mark the installation site, retreating from the edge of at least 6 cm.
2. By placing a ruler, spend a flat line through the end of the door and continue the markup from the back of the canvas.
3. Drill to prepare a hole on? The thickness of the door.
4. Repeat drilling from the second side of the canvas. It is important that the rejection of the axis of the hole horizontally or vertical originates.
5. The chisel to knock out a niche for mounting a latching mechanism.
6. Insert the latch and check that its edge is in a single plane with the door cloth.
7. Two parts of the handle bring the door from different sides and guide to pass through the hole. Tighten the design bolts.
8. The end of the box is separated from the metal plate - to prepare a sample for tongue and frame, to try on and fix the plate with screws.

Over time, it may take the small repair of the handles of interroom doors with their own hands. Sometimes, that the elements are not loosened, it is enough to pull the screws with a screwdriver.

This wooden handle for the door to the bath, we will make a piece of 26cm long, 10 cm and 5 cm thick. It is 26cm of length and 10 cm width turned out to be a handle for the bathhouse, which I painted on a sheet of paper into a cage. I wanted to draw some unusual, rounded handle. To do this, took a round plate and a round cup of the sizes you need. That's what I did.

Now I translated the drawing on the board and drank the electroll bison along the contour. Used the mill and mode, which is used during metal sawing. In this case, it turns out even and pure propyl. Dropped handle to the bath can be rounded, removing the chamfold, you can apply a carved pattern on the surface of the handle, as in the inconsistent past, you can burn the burning pattern, remember such vehicles, the contours of the hot wire nozzle were circulated. The groove remained, the grooves of these and formed a drawing. Fasten the wooden handle is best screwed. And further. It is best to use for the manufacture of a handle for the door to the bathing wood of hardwood, there will be no resin on hand. From deciduous - the linden is very soft, easy to handle wood. I would advise from birch. Here is a strong handle. Remember at least with a hand-haired firearm - everything is as one of the birch! And, I think that it is not by chance!

Now, as always, by the good tradition of illustration to the article:

View of a wooden door to the bath. Homemade handle in its place.

Here is such a necessary, original, and on its essence, a wooden handle for the door to the bath is free.

I have long been looking for in the internet drawings, schemes or drawings of homemade "auto bulls" and honestly saying nothing I did not find anything, but everything is written, that in the network of this dofiga ... I want to say, there is no photo of the devices, but there are no clear schemes with sizes. I certainly retmented a little before everything turned out and I post the pictures of my smooth tanks

In general, one handle is made (in the figure of the one, that from above) under the Flaubert's time, which can be loose in any pneumatics department.

the svolik is made of bronze (under the weak Flaubert will fit - it will not break), the remaining parts are steel. Of course, you can extract from bronze everything besides a brisk.

but the second one (the one below) under the standard time of 0.22Lr "Melkashka" (5.6 mm) is dangerous to this device.
All items besides the stem are made out of steel, the barrel itself from the bridge.

Well, someone will say that this type of fuflo, which does not shoot or rupture in his hands ...

immediately I say that it was tested and shooting 6 cartridges quite successfully. As for the return, it is present. And there was also a pretty trigger on the finger at the time of return, but this little things compared to my joy

here are the pictures of tests.
I decided to compare my ammunition: a copy of Makarova, Safari-3 "Well, the handle itself.

i took 2-2.5mm tin and upgraded a little ... (on the right photo the rear side of the piece of iron)
As can be seen from the pictures:
Pneumat can be current on the pigeons shoot;
Flauberi Safari is a little better, it is suitable rats to shoot, well, or some Gopnik scare away;
The fuction showed itself from the best side.

when he shot with a handle, a tree bar was laid under the iron sheet. The bullet broke through the steel and entered 2 cm into the tree.

i had to get her pliers, attaching efforts ...

now for those who are going to experiment with such devices, I warn that this is criminalized, both wearing and manufacturing (up to 5 years) ... so think before do it.

well, here is the long-await drawing of my handle. Who has advice on improving, unsubscribe will be only glad.

Handle-bracket D / Wooden windows and doors (Wooden, round, accurate) Price 92.00

Makmart offers you a large selection of furniture handles of the Crystal series BU 004.

160. Handles of the staples for doors 09 bracket is a modern classic, black 160 mm.

Italian quality fine elegant.

Door handles for baths in Russia

Show-room G ITALY has long been. Moscow, ul.

Nakhimovsky Avenue E-Estrase. RU Estimated portal, Indices of CMR inflation, construction, compilation of estimates, to ride. Indesit refrigerator spare parts catalog inexpensive in Kazan, Kirov, Samara, Moscow, Perm Krasnodar is a kitchen.

Refrigerator handle Indesit, shelves. The production company "Secret" was organized 2001. Trading house 21 century Buy furniture accessories and components wholesale in the time of operation was mastered.

Glass door shower or fencing under the order from the manufacturer at a profitable wholesale and retail store-shop with more than 10,000 assortment names.

seven retail. - Door - in the online store "World of Castle" Moscow. We offer the cost of the input metal company OLDOR-M satisfy any wallet.

Handle-bracket 96mm RS081AB; LDSP LIME 999/11 TSh 3500 * 1750 * 16 (e) Atlanta Oak White Furniture Furniture Business. Asset for more than 15 years successful on. Pen-bracket d / wooden windows and doors (wooden, round, accurate) BRASS elite knobs-brackets matte gold antique old.

ask a Question. In our online store handles of interroom doors, from Italy often decoration of your kitchen is a refrigerator, and especially his handles, the design of which if you have any questions, our specialist will contact you and.

Online store furniture accessories | IFC Samara to buy for the company is engaged in the wholesale and retail sale of materials manufactured by corps.

Input metal doors latch, castle round foreign wholesale retail LDSP, plywood, accessories of the best producers in Russia. Exhibition samples of doors with a discount up to 50%! Contacts Store Rubankov. Pen-bracket d / wooden windows and doors (wooden, round, accurate) We offer to familiarize yourself with the prices of the prepared economy cuisines, as the individual elements of the RU. Addresses of stores in St. Petersburg scheme.

Handles. Nakhimovskiy woodworking carpentry tool.

different types of spare parts for. BU 004.

You watched

Emale aerosol heat-resistant (up to + 650 ° C) Kudo silver (5001), 0.52l
Enamel PF-266 Lacra Golden-brown, 3kg
Incandescent Lamp 150W E27 (Standard)
Terminal block 12-pair 1.5-6.0 mm2 Navigator
Diesel Gun NEOCLIMA NPD 30
Blades, 18x100x0.5 mm 10pcs / pack kinwehr
Chisel flat 20 × 250mm SDS +, Bosch
Solvent 646, 10l (TU)
Praktik M100 masonry mixture, 30 kg
Bur 14-615mm SDS + (550mm), Bosch
Primer Paleta Betonact, 12 kg
TV plug (mother)
Pliers with a 2-component handle MATRIX 160 mm
Cable Channel White 25 × 16 2 meters
Cable Channel White 16 × 16 2 meters
Mounting foam TYTAN O2 LEXY 60 household, All-season, 750ml
D8mm hydroelectric l10m
Cutting knob for celink cellar

Cut out a spoon of stick

It turns out that it is not so difficult to cut a spoon. At least on the description. 🙂

There is an incredible amount of sizes, shapes and styles of spoons. Miniature wooden spoons resemble vintage salt spoons.

Round wooden knobs (24)

Of course, the spoon size is directly related to the size of a wooden billet. You may want to make a tiny spoon for mustard or spices or a large stud for a hiking kit. A spoon, about the manufacture of which is said here, has the most ordinary small size. You can say this is a spoon for yogurt.

Materials that will be needed:

• straight-fiber wooden blank;
• sharp knife;
• sandpaper;
• polyurethane or other transparent varnish on choice;
• pen or marker;
• mill.

Take the wood without knots, slightly longer than the estimated length of the spoons.

Birch branch has a diameter of a 25-centle coin (or 2-ruble).

Cut one side branches along the entire length, using long strong movement "from themselves". This side will be the back of the spoon. Some more convenient to use the movements "on yourself".

Deepen a little pruning, make flat. Observe the main shape of the spoon. The top of the handle, leaving the end of the branch for the spoon dumped.

Form the handle.

When it is necessary to make a deepening, always cut down towards the center of the branch. If you cut off the direction from the center, there is a chance that you cut too much, more than they wanted.

Continue to gradually form a handle.

Now give the shape of the sneak, cutting along the marked lines.

Collect the product with sandpaper.

At this stage, you have a spoon without removing.

Draw the perimeter of the extension of the future spoon.

The sharp tip of the little blade neatly make a deepening within the boundaries of the line. You can cut either "on yourself" or "from ourselves." I think you have to use both techniques. The main thing is that you can easily control the movements and remain inside the circular line.

Be very careful to avoid accidentally slipping off the blade and stood up for the markup.

After making several U-shaped cuts, deepen the WHO drew its extent possible. Naturally, the scarlet should not get too thin walls.

Cut the grinding tool by cutting the branch tip so that it is placed in the recess of the branch.

Wrap a small piece of thread trimmed sandpaper and sand vnutennyuyu side drew.

You can also grind screams with a piece of sandpaper, holding it in hand.

Of course, if you have a cutter, you can speed up the grinding process. But, of course, that grinding manually brings more satisfaction.

Weaving from the wire was especially popular in Soviet times: then from multicolored flexible twigs Mastery of men, bracelets, rings, caskets, baskets, key chains, flowers. Today, any decoration and useful things in everyday life can be bought, but much more pleasant do it yourself and, for example, to give mother. Or surprise their peers original Baubles of beads and wire. Beginner needlewomen and needlewomen will be useful to work out of the old journal "Family and School" about how to weave wire. Here you will find schemes and Wire Weaving Methods, Hold interesting ideas for creativity.

Material: pieces of a telephone cable having a different color insulation, and thicker wire that will be needed for the manufacture of frames.

Tools: nippers, pliers, hammer and sewer.

For the manufacture of templates you will need: Cardboard, paper (dense), ruler and circula.

Schemes and Wire Weaving Methods

On the first and second drawings, various weaving methods are shown from two, three and more wire pieces. Weaving in the form of a braid (Figure 1, I A, B, B, G, D) . Take a piece of wire, bend it, the second wire is bonded from the first in place of bend. For convenience, the upper part is fixed with a carnation to the board and weave, as indicated in the picture. From two wires you can reserve the rope. By connecting two pieces, twist them into the right or left. Two "ropes", retained in different directions and put together form a Christmas tree.

Wicker "Track" (Figure 1, II A, B) . Taking a wire with a thickness of 1.5 mm, the one of its end is bend, and more subtle wires are glowing it at the place of bend, until the width is formed for your track. Having finished the first row, the end of the first piece of wire bend, passing it between the ends of the entire braid like the movement of the shuttle in the weaving machine, and the second row begins. Having finished the second row, the end of the first piece is bended again and passed between the ends of the braid, but from the opposite side. In this order weave the track to the desired size.

Braided Round Belt (Figure 1, III A, B, B, G, D, E, F, and, K) . Figure in a sequential manner shows the weaving of the belt of the four ends of the wire.

When weaving, it should be remembered that each row ends in the inventing the last end in the loop formed when the initial bending. The new series can be started from any end, but the latter necessarily goes into the loop of the first, thus completing the rowing weaving.

The belt rows from any number of wires. Figure 2 shows weaving two belts around the rod (front view and side view). The rod is made up of several wires laid in a row tight to each other.

The first end of the wire is starting behind the rod and forms a loop on the side of the rod, and the second end of this wire, the stuffing rod with the front side is inhabited in the formed loop and starts behind the rod. Then the first end of the wire is squeezed with the face with the front side and they felt in the web of the second end, and so, performing a row behind next, you can get a lounge of any length.

The second exercise is a little different from the first, the sequence of its execution is shown in the figure.

Ideas: what is interesting can wean from the wire

Round Wire Stand:

On a small thickness board in a circle at the same distance, cloves without hats are driven. Then two slices of wire 1.5 mm thickness soaring the carnations around in opposite directions. The third piece of wire is located between the nails radially, fastening the extreme braid. The center is associated with a thin wire. The resulting frame is fluttered by the fourth, thinner piece of wire. Rack on the frame starts from the center. Confolding the end of the wire, weaving are produced in a circle, alternately, and one, then on the other hand, the radially located threads.

Wire basket:

The frame is collected from the even number of wire pieces - 6, 8, 10 or more, depending on the magnitude of the basket. Initially, the right shape is fused, and then from one piece two risers, bottom and handle and fasten them with a ring. Next of the four pieces be fused the rest of the risers and the foundation for the bottom. Having bent the upper ends, hang them on the ring, tightly fixing the pliers.

First of all we can fly. Fixing the end of the wire in the center, make several interlacing in a circle, similar to the weaving of the stand, and then go to the interweaving of the radial threads forming the bottom. In the same way the risers of the parties are soaked.

With this method of weaving between horizontally reaching threads there are gaps. The basis of the handle is pulled by a thin wire, tightly driven by the rings of the spiral to each other.

Wire shopping bag:

It will take a dense cardboard for work, in size equal to the supposed bag. On it, the pencil denotes points for the holes for fastening the handles and the bag frame. In the outlined places, the holes pierce the holes and begin to make two metal or wooden rings for the handles. The finished handles are applied to the cardboard (in the places of fastening from two sides) and fasten them to the cardboard with a thin cord or wire, as indicated in the picture.

In the manufacture of the fiber frame, the wire is passed into the holes and pounce on the rings of the handles. Then one of the ways proceed to weaving from the bottom up. After the side of the bags are ready, the cardboard is removed. For winding the handles use fine wire.

Color wire flowers with their own hands:

Figure 6 shows ways of performing colors from spirals.

Flowers are collected in a bouquet and wind "stems" thin wire, the ends are divided into separate beams (8 - 10), which serve as a frame for weaving the base of the vase. The method of weaving is the same as the sides of the basket (see Figure 4).

Dog and deer:

Torching and deer head weave in the form of a round belt (see Figure 1).

The front legs are woven in the body and go into the neck performed by the method of spiral navigation. The dog consists of a skeleton, sculpting.

How to bend and connect wire

From the wire you can make many different items - from the simplest hook to the most complex drawings. It is used copper, iron, steel, aluminum wire and a telephone cable with a different color coating. Wire stored wound circles. From tools needed: hammer, small vice, file, ticks, pliers, pliers, passas, round-rolls, plumbing scissors, soldering iron.

The wire is straightened, stretching it between two wooden bars or pulling around a round metal rod (door handle). Steel wire or thin rod metal is better straightened on a solid surface with a hammer or a painting. Small details bent with pliers or round rows. Large and solid - bend in vice.

The iron and copper thin wire are cut with nippers and passages. Steel - in place of the section is pre-heated on fire. The band or sheet metal is first placed, and then in places markings slightly abruptly and chop up with strong blows.
Separate pieces of wire and other metal parts are connected, bending or soldering. In the first case, make several turns, pulling the wire to the rod. Before soldering, the surface of the parts is thoroughly cleaned with a file or sandpaper from dirt, rust. Wire soldered, folding together two ends, pre-for the strength of their twist. A thin wire can be soldered by applying the paste - tinol that is superimposed on the place of the spike and heats up on fire.

To learn how well and purely perform things from the wire, you must first make a number of simple details:

• Spiral spring. On a round wooden cloth of a cylindrical or cone-shaped shape, a wire with a thickness of 1-1.5 millimeters (Figure 1, a) is wound.
• Rings and half rings. The spiral spring is destroyed along (Figure 1, b).
• Flower. Six half-colts are soldered to the ring (Figure 1, B).
• Gear. Six half-colts sold out between them [Figure 1, g).
• Spiral. The round-rolls take over the end of the wire and the rotation of the hand of the hand in a circle of it (Figure 1, e).
• An openwork of three spirals (Figure 1, E).
• Openwork leaf. 4 - 5 rings (wire thickness - 0.5 - 1 millimeter) are manufactured on the conical shape dweller. The resulting rings give the shape shown in Figure 1, f, and the base is soldered.
• The shadownik is fused from one wire pliers (Figure 1, s).
• Wave (Figure 1, and).

Star and ornamental strip. On the table, a small thickness mark the drawing and driven nails without hats:

Skach:

Flowerian. From the two-dimensional wire, the bracket with a spiral conclusion is fused. Separately roll up the ring and fasten it, intercepting the sides. At the top of the spirals are connected by three wires of the wire (Figure 4).

Furniture. Made from one and a half-two-millionth wire. Its parts fasten with turns among themselves. Small-layer plywood or cardboard can serve as a seat and a table cover. For fastening in plywood, small holes are made (Figure 5).

Puzzle. It should be separated by its parts so as not to bend anywhere else and not compress it (Figure 6).

Horse. Of the two pieces of wire with a thickness of 2.5 - 3 millimeters, the legs are fused and two lower spirals. From the third piece of head, neck and upper spiral. From the fourth - mane, moving on the back into the coils, fastening the pieces of wire. The mane is soldered in several places (Figure 8).

Heron. It is made of one piece of wire (cross section - 3 millimeters) with spiral rings for a decorative vase (Figure 9).

I. Lyamin, Magazine "Family and School", 1971