Each user may need to put a password to their laptop or computer so that unauthorized persons cannot use your device. There are many ways to make a laptop password, such as installation or via BIOS. But we will look at the two of these methods.

In addition to those methods that I said above, at the end of this article will be a bit written about the additional methods of protection of the PC.

How to put a password on a laptop through windows

The most common method is to install a password through the operating system. But how to put a password, so it will be enough to find out enough if any experienced user wants to access your computer. It will easily be able to reset the Windows password. In any case, if your computer is almost always with you, then this method will suit you.

Installing Windows 7 Password

To start go to "Control Panel", Switch to the icons view and open the parameter.

Now click on "Creating a password of your account" And come up with a good password. You can specify a password tip. In case you forget it, she will remind you to you.

That's all, as you can see everything. When you turn on the computer, you will need to enter the password. By the way, you can press a combination Win + L.So that the laptop is blocked again. Made before entering the password.

Installing the Windows 8 / 8.1 password

In the Windows 8 or Windows 8.1 operating system, the password is made a little differently.

Go to B. "Control Panel" And again click on "User accounts". We do all the same.

Either you can open "Computer Settings" On the right side of the screen, then "Changes in parameters", then, go to point "Accounts".

Going to the tab "Input parameters" On the right side of the window, you can set a password, but not only text, but also graphic or pin code.

After you independently put a password, save the settings and after each computer startup, you will be prompted to enter a password.

How to put a password in bios

This method is for a regular user, though more complicated, but very effective, as to reset the password installed through the BIOS, a person needs to take out the battery from the motherboard. In the case of a laptop, it will be problematic. Therefore, if your computer is not supervised, this method will suit you.

How to enter the BIOS you can read. So, we go into it, usually using the F2 or F8 keys, depending on the model of your motherboard. Usually, the key to log in to the BIOS is displayed when the computer is loaded at the bottom, look attentively.

Now we need to find such a section where we can set the password. Look for something like BIOS PASSWORD. or User password.. It is usually enough to install a user password (User Password), then the password will be asked both when the computer is turned on and at the entrance to the BIOS.

After installing the password via the BIOS, go to the last tab EXIT. and choose a point there "SAVE AND EXIT SETUP", that is, save and exit.

Additional defense methods

Of course, the methods described above will not protect important data from the experienced user. Such a person can remove the hard disk and take advantage of your information. If you want to save more and data, you can use special utilities, such as the TrueCrypt utility, Windows BitLocker. There are a lot of such programs, but the most efficient will be described by me and you can see them on this site. So, follow the news.

More and more users begin to be interested in personal data security problem: how to put a password on a laptop or computer. This is most often happening after the appearance of private information in general internet access or various social networks.

In the article, we will tell about the simplest way to protect data and restrict access to personal information. You can protect yourself using a password setting on a personal computer or laptop.

Password setting

In the modern world, the lack of telephone and other gadgets often causes amazing around. The same perplexity causes people who do not have a laptop or computer. Most often, the computer is a multiplayer device, including at home. Each family members use any laptop functions to work or entertainment. Almost all family members have access to only one installed profile. In such a situation, registration of a separate account and setting the password are quite acceptable. It is necessary to delimit access to the stored information. In addition, it is possible to separately configure each profile: personalization, orientation and appearance of program labels, tabs in Internet browsers, access to certain resources.

The laptop in turn possesses the main advantage to a personal computer - unlimited mobility, it can be done without any problems or to visit. But the problem of open access to the stored information is very relevant for him. If a home laptop is used in the work, then almost every employee, if desired, can look at the hard disk where personal data is saved. Access can be obtained even remotely if the laptop is connected to the local network (local corporate network of the company) or to the Internet. In this case, personal data will be under the blow, and there is no physical presence of an attacker, visually detect that the connection occurred from outside is extremely difficult.

Installation of a password on the device significantly reduces the possibility of unauthorized access of any third parties to the personal information of the owner. Currently protect data in various ways, but in this article we will tell you exactly how to install a password on a laptop or password on the BIOS device.

Installing the Password on the BIOS is extremely important. Having access to the BIOS, you can get to all the information stored on the hardbook hard drive, simply by making the disk or flash drive with Live CD / DVD.

How to set a laptop password - detailed instructions

Many users work not only on devices without a password, but also under the administrator account. From the position of security, such work is very reckless. Next will be described how to create a separate account.

1. In the Start program menu, you must select "Control Panel"

1. In the control panel, click on "User Accounts"

1. Press the "Creating a password of your account"

1. The invented password must be entered twice: in the "New Password" and "Password Confirm" window. The action is confirmed by clicking on "Create Password". Now there is information about the account that it is protected by a password.

In order to change the existing password, you must execute item 1 and 2, then select the section "Changing your password". To install a new password, you must know the current one, otherwise the system will not allow changing the code.

It is possible to make several separate accounts for each of the users of a laptop or computer. In order to do this, you need to repeat the first two steps and go to the "Manage another account" section (as shown in the screenshot below).

Under the list of existing accounts you need to select "Create an Account".

There are no deliberations in the names of accounts. It all depends on the desire of the user. As for the type of profile, the "ordinary access" is enough for the full use of the laptop, without changing important settings.

After registering a new account, the image with its name and the type will be displayed in the list.

After that, the new profile must be protected by a password. Double click on the name of the account will open a list of possible actions. Select you need to "Create a password".

You can make adjustments to other accounts and can only create a user who has administrator rights. The rest of the users are allowed to change the password only its own profile.

Do not forget to block the computer after the end of work or press the "Win + L" combination in order to exit the personal account.

How to Pass Bios

1. You must restart the computer and go to the BIOS. When performing a reboot, it is usually indicated that for this you need. Most often these are keys F1, F2, F10, F12, DEL, ESC.
2. It is necessary to find an item for changing the password from the list of possible dance. The name of this item may be different, it depends on the model of the device used. For example, Bios Setting Pasword.

If you stand a password for a simple user, then it must be entered each time the computer is loaded and to gain access to the bios. If you put a password for the administrator (Supervisor), it will have to remember it only to access the bios.

How to set a password to enter Windows account

Warning number 1. If at least one account without a password is present on the computer, then the meaning of the remaining accounts is sharply reduced.
In this case, it remains to be relied on the possible limitation of the rights of this user and the inexperience of intruders.

Warning number 2. Even if all users in the system have passwords, check if accidentally access to confidential files from the network.

Creating a user password in Windows 8.1

Launch Control Panel:

Enter B. User accounts:

If you want to set protection to another account, click Managing other accounting record and choose the desired .

Choose Input parametersin the left side of the window.

In the right part in the area Password Press the button Add:

Enter the secret phrase, its confirmation and prompt. After that click Further:

Click Ready:

Creating a user password in Windows 7

In the "seven", the procedure is different only by what everything is done without leaving the control panel. You need to choose an account and click on the link Creating a password of your account:

Then enter a secret combination, confirmation, tip and press the button Create a password:

How to set a password for switching on

An option is almost always present in laptops. Power-on Password (Password on switching on), and in the BIOS of stationary computers a function is quite often found HDD Password. (Hard disk password).

Why do you need it?

If you are protected by all Windows accounts, then access to information can still be easily obtained by booting from any LiveCD.

Installing HDD Password on Computer

• Enter BIOS.
• Go to the Security section.
• If you have an HDD-Password point, log in to it.
• Enter the secret code and confirmation.
• Save & EXIT.

Installing Power-ON Password on Laptop

• (On the example of HP laptop)
• Enter the BIOS.
• Go to section Security.
• Choose Power-on Password.
• Specify the secret code and enter it confirmation. After entering Press ENTER:

Now, when you enable the computer, ENTER PASSWORD is immediately issued. If you do not know POWER-ON or Administrator (Supervisor) Password, you will not be able to load any hard or optical disks or USB flash drives:

disadvantages

Well, finally, I want to mention the minuses. The above methods work only in cases where there is no possibility to open your computer (for example, when it is in sight, and disassemble it too risky). But if you physically remove a hard disk from the system unit, then no passwords on the inclusion and protection of Windows accounts will save you from theft of information.

Often at work or at home, the computer uses several people and occurs such a moment when it is necessary to limit the circle of persons who will be able to use it. In such cases, the simplest and rapid solution is the installation of the password.

This article will be discussed how to put a password to a computer with installed Windows 7, and you will learn about parental control to control the child's time on the computer and blocking the computer in the BIOS.

Installing the Windows 7 account password

Windows password is installed in several clicks and does not even require a computer reboot after its creation.

Click the Start button and go to the Control Panel.

In the "User Accounts and Family Security" section, select "Add and Delete User Accounts"

Now you need to select a user account for which you want to install or change the Windows 7 password. In my example, the ADMIN account. You may have several "Marina", "Father", "Son" and so on. Click on the desired account.

Click "Create Password".

That's actually here we can put a secret combination to a computer. Pay attention to the tip field. Here you must specify the phrase that will be associated with your password in case you forget it. At the same time, the tip should be made to the correct idea of \u200b\u200byou.

The password on the laptop is created. How to change it now if he suddenly became known to someone? To do this again, go to the settings of the desired account. If the password is set, then instead of the "Creation of a password" button, "Change password" will be written. You can also remove it.

Browse the learning video on the material above.

Installing Parental Control in Windows 7

Now, when you know how to put a password on the computer, let's talk about such a thing as parental control, which allows you to limit the child's account in time.

In order to set parental control, enter "Start", "Control Panel" and in the "User Accounts and Family Security" section Select "Parental Control".

Select the account you want to limit. In my example, this is the "my child" account.

In the window that appears, click "Enable Using Current Parameters" to enable parental control mode on this account.

In this window you can make restrictions on the time of work on the computer. For example, to prohibit your child under his account to use a computer in school or late. You can also prohibit the use of certain installed programs or games on the computer.

Naturally, you also need to put a password to the computer for the child's account.

I also offer you to watch a video about parental control in Windows 7.

Blocking via bios.

The usual password on the computer in Windows 7 is a good and fast way, but manifesting some time on the Internet will be able to reset anyone. Therefore, for greater reliability, it is also recommended to install a BIOS password that runs before the start of the Windows operating system. Accordingly, the program to reset the Windows password, the attacker will not help.

To start go to the BIOS. To do this, after turning on the computer, press the DEL button on the keyboard until the blue menu appears. Consider, on some computers and laptops, the input to the BIOS is performed by pressing the DEL button, but for example F2.

After you entered the BIOS, go to the Security section (Safety).

You need to specify two passwords. One for the BIOS administrator, which will allow you to control the changes in the BIOS. The second directly user who will be required to be entered to download the computer.

To begin with, install the BIOS administrator password. To do this, select Change Supervisor Password and set the required password.

Now select Change User Password, which will need to be entered when booting a computer.

To turn off the password, select Clear User Password.

If you have forgotten the password, then for his reset, you will have to take out a round battery on the motherboard for a few minutes. At the same time, the BIOS settings will drop to the factory. If you have a system block of a computer, then this will not be difficult. If you have a laptop, you have to take some time to get to the motherboard of the laptop.

If you are using a PC at home or in the office, there is always a chance that you will want to work for your computer. It can be family members, children, friends or colleagues. In order for them specifically or accidentally, they could not damage or change in your operating system and the established programs, it is recommended to protect your PC password. This article describes how to change the existing or install a new password on your laptop.

In modern operating systems, all the necessary tools for protecting personal data are already provided, which are stored on a personal computer. You will not need to install additional programs before putting a laptop password.

Windows 7.

If you are using Windows 7, then this part of the manual, how to put a password on the laptop, is intended for you. To set the key to log in, you will need to open the settings menu of your account settings:

The next time you enter Windows, the system will ask you already have a new version of the key.

Windows 8.

Windows Windows 8 needs to open the "Accounts" section. This can be done through the control panel or through the graphical menu on the right, in the "Parameters" category. In order to call it, you need to hover the cursor on the right upper corner of the screen and slowly spend it down. On the opened panel, you need to click on the "Parameters" section and select the "Change Parameters" subsection.

Using the navigation menu on the left, open the "Input Settings" category. Here you can set an ordinary protective code, a graphic password (drawing a specific figure on the screen) or PIN code, as on the phones (short key of four digits).