Plastic bottle - a familiar thing with which the majority faces daily. Therefore, it does not come to mind that the plastic bottle can be used by an alternative way. For example, a plastic bottle is a non-standard material in order to make a flower. Such an unusual flower will decorate the garden or house.

Bottles flowers: Main advantages

There is a lawsager question: why do you need to make flowers from plastic bottles? Such a snap is resistant to negative external factors: high humidity, temperature drops, wind, sunlight. Therefore, flowers from plastic bottles will stay outdoors for several seasons in a row without changing the original appearance. Also, plastic bottle is almost free material. From the first time the flower did not work? Boldly experiment again. An attempt to make a new product will not cost anything, because the next plastic bottle will be easily found.

Also, a plastic bottle is a flexible and plastic material, with which it is easy to work. Having studied a step-by-step master class, start making a flower. When the basic techniques are learned and becomes clear how the flowers are made of plastic bottles step by step, then try to start experiments.

Plastic bottle - product that is decomposed in vivo for 450-1000 years. But 90% of plastic bottles are not recycled. Therefore, make a plastic flower - it means to make a positive contribution to the environment.

How to make flowers from bottles so that this creative work does not harm health? Almost any instruction includes a piece when a plastic bottle is melted over the open flame. It should be remembered that the plastic bottle in the heating process allocates toxic substances.

Therefore, the closed room is not the best place In order to make flowers from bottles. The optimal option is not to work indoors, but outdoors, for example, on the terrace or balcony.

How to make flowers from plastic bottles: consumables

Before making a bottle of flower, you need to cook everything you need. We need:

• plastic bottle;
• wire for the manufacture of a stem;
• alkid aerosol or acrylic paint, which will be needed if the plastic bottle is inappropriate color;
• lighter or candle over which plastic bottle melted;
• pattern in order to quickly draw one petal or leaf on plastic;
• buttons or beads that will decorate the middle of the flower;
• marker to draw on a plastic bottle of petal of the desired shape;
• the baking tray over which plastic bottle is heated: so molten plastic will drip on the baking sheet, and not on the table or on the floor;
• scissors for cutting blanks.

How to make bottles Flowers: The main stages of work

Make a flower for everyone, since the technology of work is simple. Start work stands with the definition of a plant that I would like to make with your own hands.

1. You need to draw a template to the marker on cardboard. The shape of the template is determined by what form will be a leaf or petal. Sometimes the flower consists of one billet.
2. Then you need to cut all petals, leaves or flowers.
3. In the middle of the workpiece, the hole is skewed with a sewn or soldering iron. The hole is necessary in order to attach the stalks and a whisk.
4. Holding the product over the flame, you need to give the workpiece the desired form. Initially, the ends of the workpiece fall over the flame, and then the petals from the bottom are kept. As a result, it must remind the petal. It is better to take the workpiece with the help of a tweezers and use it to give it the desired form.
5. Another option is a flower, the basis for the manufacture of which is the upper part of the plastic bottle. In this case, it is not necessary to cut the workpiece over the template. The hole for the stalk and the bunny is cut into the lid.
6. The stem is made from a segment of a metal wire, wrapped with green tape or green molten plastic. The leaves are attached to the wire in the same way.

Rose from plastic bottle with their own hands

Rose consists of several blanks connected together. For rose petals and her whisk, a plastic bottle of red, blue or yellow is needed. For leaves you need to prepare green plastic.

The more roses have petals, the more realistic it will look like. Hold plastic blanks over the candle or lighter longer, if you want the rose to be the original form. To decorate the middle of roses use buttons or beads.

If necessary, the finished rose is covered with paint of any color. It is interesting to look a rose from a plastic bottle with two-color petals. For example, yellow - in the main part and pink - at the ends. Also, the lower part of the rose may differ from the rest.

Clivia of plastic bottle

Another option is a clivia, a flower similar to orchid. The top of the plastic bottle is needed in order to cut the main billet to scissors. Do not forget to take a thin wire and beads to make a whisk. Before starting the ride, the wire must be bent so that the beads do not slip down. The free end of the wire is on the hole in the middle of the lid. Petals cover the paint of the desired color. If there is a plastic bottle of white, then only part of the flower can be painted.

at 05/28/2017 147,848 views

From plastic bottles you can make a lot of useful things for the garden and giving

With love, equipping the city dwelling, we are no less touching to our country sites. We try to improve them, create comfortable conditions for themselves and make special notes of attractiveness in smooth rows of beds and berry bushes. Many daches for their creative experiments elected the most affordable and flexible material - ordinary plastic bottles. About what products from can be done for the garden and giving, we will talk further!

• Plastic Bottles House
• Country crafts from plastic bottles step by step: palm from plastic bottles
• Plastic crafts: several tips
• Master class from plastic bottles step by step

Wonderful pendant pots for cacti from plastic bottles

Resourcefulness in ways to place many plants on the garden plot

Plastic bottles in skillful hands will become an excellent decoration of your landscape

Beautiful flower of plastic covers

Crafts from plastic bottles step by step: from Flower Cachepo to Fairy Thames

The idea of \u200b\u200bmaking useful fixtures and decorative plastic containers not new. The first attempts brought our grandparents to the construction of low fences for tracks. Evaluating the plasticity and low cost of the material, the craftsmen from the people went on. And now the country's dachas decorated with full fences, funny figures and unusual devices from plastic bottles.

Beautiful ostrich from PET Tara can not help your children!

Thanks to fantasy and such an excellent material as plastic bottles, we have almost limitless opportunities to create crafts for every taste, any complexity and direction

Pictures from plastic bottles and other capacities have grown into an integer art direction

Plastic bottles have long been very in demand from gardeners

Magnificent Orange Flowers from Pet Tara

Crafts and decorations for giving and garden from plastic bottles do not require the use of complex tools and specialized skills. The main thing is to have time and desire, and also enough material. Those who have also turned out to convincingly proved the limitless possibilities of such a needlework, and we have prepared an overview of the best examples of crafts.

Objects of furniture, vases and a vase from a plastic bottle with their own hands

Comfortable and very stylish chair from plastic bottles

A sheet of plywood, sixteen semi-cable bottles, tape - and a convenient and durable coffee table will appear on your site. Phaneur can be replaced by plastic or organomet, old countertop or plexiglass. Of the same materials, slightly changing the design, you can make a garden bench. Some diligent and patient masters manage to collect full-fledged sofas and chairs from bottles.

From plastic bottles you can even make the basis for a full-fledged sofa, if firmly and gently bore them

Suspended Vase or Base for Cachepo

Pinds of plastic bottles do it yourself

How to make pouf from PET

Plastic Bottles House

There are among dacities and real builders who know that it is possible to build everything from plastic bottles all that the soul will wish. They are assembled from plastic bottles of arbor, toilets, sheds and even. The only complexity of such structures is not in their assembly, but in collecting the required amount of bottles.

House with a roof of 7,000 bottles

Plastic bottles - a good material based on the construction of cottages, greenhouses, shower, toilet or other partitions

Walls of greenhouses from containers on a wooden frame

Rounds from plastic bottles will help arrange garlands for the garden

Playground: Flowers of plastic bottles and toys from plastic bottles

Crafts from plastic bottles will help to decorate the playground

All sorts of crafts from plastic bottles are especially attractive for the design of the playground. Absolutely safe, they can become the basis for toys, and for cheerful decorations, and to create plot compositions. Funny elephants, bees, swear and hedgehogs, bright flowers, cheerful lanterns will turn the country island of childhood in a fabulous kingdom.

Whole plot for the playground from plastic bottles and canister

From the caps of plastic bottles together with children, you can make small crafts, and large plot mosaics

Plastic bottle doll

Examples of a variety of crafts that will help gardery with placement, easy transportation and leaving plants

Piglets of large plastic bottles - Sustainable stands for germination of seedlings or small plants

Crafts for garden or lawn decor: PET-Tara parrot

DIY for the garden and useful little things

Multicolored turtles will become an excellent element of the decor of your garden.

With what ease, the "crazy" hands of summer houses turn the used plastic container into useful summer cottages, you can make sure passing around country areas. A washbasin was comfortable on the trunk of the village, and in the next yard, the arbor was decorated with multicolored with fragrant and ampel geranium. We also prepared for you several descriptions of crafts from plastic bottles for the garden and the garden.

Bird of plastic bottles do it yourself

Painted garden lanterns-owls painted

Bottom of plastic bottle

Birdhouse from plastic bottle make very simple

Plastic bottles cut in half will become a pretty flower pots, it is important to color them carefully. It is also desirable to take opaque bottles for this.

Forever confusing and stinging twine for garter seedlings will cease you to torment if you hide the tangle into a plastic bottle. Just cut the bottle in the middle, put in the top of the tangle in the upper part, skip the end of the twine in the neck, connect the parts, secure the incision of the scotch - and the comfortable storage is ready.

Drip watering from plastic bottles

Your seedlings will not start, even if you leave for a few days: install semi-automatic watering. And again the plastic bottles come into business. We cut off the bottom of the bottle, approximately 2/3, drill 4-8 holes in the tube, close the neck, pick up the bottle of the neck down, pour water - and seedlings are provided with moisture at the time of your absence. A similar garden of plastic bottles (photos of this confirmation) will save your time and financial resources.

Automatic watering "Aquasolo" is a conical nozzle on a bottle of carvings that do not require spending time on the drilling of the slots, launching into the ground and so on

Anthurium with a convenient automatic watering system "Aquasolo"

Maximum and saving place: suspended one over other plastic bottles with a capped tube with water passing through them

• For the same seedlings of plastic bottles, excellent containers are obtained. By cutting the bottle in half and taking the bottom, pour into it a prepared substrate, plant the plants and place them on the rigged out of the wooden slats. This design is suitable for home decoration with flowers.

Beautiful pendant pots from plastic bottles will not only decorate the interior, but also make it unique

Excellent vase from a bottle of shampoo with your own hands

Arrangement in the country of compact placement of seedlings or small plants

Plastic Bottle Feathers

Some crafts from plastic bottles for the garden are affected by the owners ingenuity. After putting a bottle on the hose and doing a lot of holes in the bottom, you will get a wonderful diffuser for watering the garden. From five-liter tank, you can build an elegant lamp on the veranda, and the container from under the mineral water is suitable as a bird feeder.

Plastic Capacity Bird Feed

Simple and comfortable bipset jet hose for watering garden

• Plastic bottles will help you save trees from pests. Cut the bottle along, two halves, fill the mixture attractive for pests with the addition of insecticides and join at the base of the barrel.
• From bottles you can make a magnificent decorative all-weather and all-season flower bed. Just paint bottle snacks in different colors and assemble a wonderful carpet from them, sticking them to the open side into the ground. Figure carpet can be previously played on paper.

The design of PET follows was very popular

• One Brazilian engineer made calculations and built a solar collector from plastic bottles. The design can be positioned on the summer area, connect with a cumulative tank, and you will always have a warm shower.

A device of a solar collector from plastic bottles

Automatic watering seedlings and decorative plants in your absence using the inserted next to the roots of a plastic bottle with small drilled in the neck or cover with holes

Hung one over another cut plastic containers - the fastest and economical output from the situation when you need to germinate a lot of seedlings in a limited space

Making owls from plastic bottle with their own hands

Bottles for germing and winter overexposure of plants - the ability to save place and provide good irrigation and drainage

Products from plastic bottles: art masterpieces

Magnificent dandelions from PET Tara will not cease to delight you and your guests

Fantasy of folk craftsmen is so diverse, which leads to the appearance on dumart sites and wonderful animals, fairy tale and cartoon characters, and exotic plants, and original thematic compositions.

Camping the bottom of the plastic bottle or cup with dry twigs and get an unusual candlestick protected from wind blowing

Rainbow Garden Decor, Workshop, Garage: Spiral Fountain, Sliced \u200b\u200bfrom Multicolored Plastic Bottles

Plastic bottles are used not only to decorate the garden, but also for the decoration of the home

Land crafts from plastic bottles:

If you have a small reservoir on the site, it can be plastic palm. It's not difficult to make it. You will need:

• 10-15 brown plastic bottles (for palm tree trunk);
• 5-6 green bottles (it is desirable that they are long);
• iron or jerry rod;
• shilo or drill for the manufacture of holes;
• a sharp knife or scissors for cutting bottles.

Palma from plastic bottles looks very beautiful

Now proceed to the manufacture of decorations.

• We cut all brown bottles in half. We take the lower parts and we are detected by the sewing hole in the bottom of each of them, in size equal to the diameter of the rod.

Tip! You can take the top parts of the bottles, then you do not have to do additional holes.

• In green bottles, we cut a bottom of about 1 cm. One of the billets are left with a neck, the rest are cut off to get a loop.
• Gently cut the green bottles along the three equal parts to the loop itself.

Palm tree making

• The edges of the brown parts cut the cloves to create a simulation of a rough palm tree trunk.
• Reliably fasten the rod in the soil. Calculate the length of the rod, laying up brown parts on Earth in one row, plus 2-3 cm on the leaves.

We put on it brown bottles.

Palm Tank Making

• We ride our leaves on the free top of the rod, completing the work of the harvesting with a neck. In the lid, we do a hole and screw it on the last sheet, securely fixing the entire crown.

Connection of the barrel and leaves

Assembling palm trees from plastic bottles

Using several rods of different lengths, you can create a real oasis. As you can see, handicrafts for the garden from plastic bottles do it yourself are not so difficult, the main thing is to find a sufficient amount of material and take the basis of one of the proposed ideas.

Step-by-step guide: We make fabric pots on the basics of plastic bottles.

Hedgehog from a plastic bottle and a twine rope: grow seedlings and small rabid plants

Crafts for giving out of plastic bottles

From plastic covers you can create real masterpieces

Do not throw off the caps from bottles. Decorative crafts made of plastic bottles for giving and garden, too, can also be beautiful in his landscape. They will serve as excellent mosaic material for decorating fences and walls of the country house.

Bright compositions from plastic covers will help make your landscape design Merry

Master class video (from plastic bottles of standard container):

The track of plastic covers is not only economical, but also very beautiful

Large-eyed red-blue mosaic of caps different sizes

With a slightly ending with the pattern, painting and drilled in the sides of the holes of the hole, you can collect the slot on the door. Excellent insect protection option!

The lids can be turned into a beautiful countertop, and in a practical rug at the threshold. Use them for the decorative finish of the internal space.

Magnificent curtains for doors made of plastic covers

Canopy for a car scattering sunlight

Beautiful lights in Hawaiian style

Before you start, remove the labels from the bottles and wash the container well.

For the stability of vertical structures, fill the bottle of sand or fine pebbles.

Dragonflies from corrugated plastic bottles

Caverium Fruit Collection Device with Trees

Pendant pots from PET containers depicting animals perfectly fit into the interior of the children's room

Choose for crafts different in the softness of plastic bottle. For example, for a dog's body or elephant, take a strong foundation, and it is better to use softer plastic for the ears.

Master class from plastic bottles (step by step):

There is a lot of ways to decorate your house, an apartment, a plot, for example, it can be done with plastic bottles, or rather crafts from them - cheap, comfortable, stylish, unusually, beautiful and, most importantly, durable. There are also a tremendous amount of such options, but the most versatile and relevant will be the most versatile and relevant in any place, therefore, it is exactly how to make flowers from plastic bottles, and today's master class will be devoted.

Option 1 - Luxury lilies.

1. Prepare everything you need to work:

• scissors and knife,
• directly the plastic bottle itself (one or more),
• nail polish.

1. With the help of a knife and scissors, cut the bottle in the roundabout places, as shown in the photo. As a result, you should get a smooth cylinder, cone (the upper part of the neck of the neck) and a cup. Flowers will do exactly from the last (cups and cones).

1. Take the cone for the neck and cut the same way as demonstrated in the photo. How much exactly to make petals and cups, decide for yourself, it is important only that they have about the same size.
2. Remove the end of the petals triangular shape.

1. Camely seashells from the base and tighten with a knife, for this heal each of them alternately between the blade of the knife and its big finger At the base and with effort, stretch your knife.
2. Similarly, give a curved shape of petals. As a result, you should get this flower.

1. Complete its creation by tying the petals nail polish with the external and inside. In the meantime, it will dry, produce a flower of another form from the bottom of the plastic bottle (cup). The principle of its creation is the same, only the number of petals is strictly defined by the bottom bends and amounts to 5 pieces and it is not necessary to twist anything here: just cut and deactivate (nail polish.).

Option 2 - Curly Flowers.

1. Prepare the desired material and tool:

• plastic bottles;
• beads or small beads;
• marker;
• knife, scissors;
• wire;
• pliers;
• candle (you can use matches or lighter, but it will be less convenient).

1. Cut from the bottle of bottom.
2. Cut the remaining part so as to obtain a spiral of a width of about 10 cm.
3. Marker Draw on it stem and leaves on the sample (see photo).

1. Cut the drawn branch and place its edges with a candle.
2. Similarly, create other blanks until you get the number of twigs you need.

1. Go to creating colors. They can simply draw on multi-colored plastic bottles and cut, but much faster and easier will immediately create two templates (bigger and bed) on paper, and after simply bypass their required number of times on the plastic canvas.
2. Cut flowers according to the resulting circuits and place their edges with a candle.
3. In the middle of each of the "floral" billets, take two holes.

1. Take a small segment of the wire, bend it in the center and put three beads or beads on it.
2. Continue to assemble the flower, for this, on the same wire, you immediately immediately plastic blank-flower smaller, and then more (it will be more beautiful if they are different colors). Twister several times the wire at the base of the resulting flower so that he does not fall apart, and, having done two holes in any random place on the branch created earlier, attach their creation there, again by reclaping the wires of the wire with each other.

1. Repeat paragraph 10 and paragraph 11 until the "sleep" all your branches with flowers.
2. Pliers "bite off" excess wire, and what will remain, beaten closer to the branch so as not to be broken.
3. The tips of the twigs (the one that without leaves) alternately heat the candle and bend, then collect them all together and wind the wire, not forgetting to make a small loop. With it, your composition will be easier to be attached in the selected place.

Curly flowers from plastic bottles are ready, it remains only to slightly disguise the place of fastening (wire) with a neck from the bottle (without a helical part). Those who wish can leave everything as it is.

Option 3 - Clivia.

1. Fight everything necessary:

• shill, scissors;
• alkyd paint;
• pVA glue;
• wire, thick and thin;
• tape;
• beads or beads;
• plastic bottles;
• candle.

1. Cooked bottles cut the necks (along with the lids) at the sefing site.
2. Cut them (before the thread for the twist) on 6 petals of the same size. The edges of these petals are rounded with scissors.
3. Place the edges of the billet with a candle.
4. Purchase each petal circle, after twisting with it, the lid, alkyd paint. It is better to spend painting on the street, pre-put on your hand holding this circle, cellophane package.
5. After drying, the center of each petal circle is recommended to be painted by another color (as beautiful and more natural).

1. Prepare stamens. To do this, take small segments of thin wire, bend them in the center and put on them beads or beads. Then gossip the edges of each of the stamens among themselves.
2. Pulse corks in the center of the sewer, and then expand the hole with scissors so that the edges of the 7 stamens could fit there. Pour into each cover a little PVA glue, screw them to the base of the prepared buds, insert the desired number of stamens in them. To the ends of these elements, tie a thick wire (stem), securing it all with glue.

1. Put the prepared blanks in the vase or glass and wait for the glue to completely dry.
2. Color covers in one color with color (green or turquoise) future stems and leaves. Dry the workpiece. Wire a wire-stem isolate suitable color.

1. From green plastic bottles, enhance the oblong leaves of different sizes. They should look something like this.
2. Place the edges of the leaves of the candle, then hold over the fire. Their bottom central parts are warmly rectifted. Then, in these places, make a shill point and stretch through them, tighten its ends and wrap the tape.

1. How to make flowers from plastic bottles and leaves to them, it is clear, it remains only to connect them into one composition. To do this, take a long (1 m) thick wire and, having pre-lubricating its surface with PVA glue, take into it with threads one of the flowers. Next, after drying the glue, the stem, ranging from the bud and 20 cm down, should be wrapped with a tape. In the place where the tape is over, it is threaded to stalk another 3 of the flower, pre-slightly bent their stems and replacing the base with glue. When the glue dries again, repeat the winding of the heated stem from the room of the adjunct by 25-30 cm down. Then, in a similar way to add 3 more flower to the composition, placing their inflorescences between those to be installed earlier. At the very bottom of the bouquet alternately with the help of glue and threads, tie 2 small, 2 medium and 2 large leafs. After drying the glue, the stem to the end is hiding in the isolent.

Video.

How to make plastic flowers from bottles with their own hands (master class)

What do you think, what can be made from a conventional plastic bottlewhich is invariably sent to the garbage bucket after using its contents? Do not be surprised, even from such a thing that seems just garbage, you can do something useful and beautiful (different animals, birds, butterflies, vases,plastic palm trees and flowerswhich will be discussed in this material). Such an easy thing to take rid of garbage and helps to decorate the surrounding environment around us.Plastic bottles - These are unlimited opportunities for fantasy and space for creativity. Next, we will tell about how to create plastic flowers from bottles - below we placed the master classes for the manufacture of daisies, valley, water lilies and other plastic crafts for children and adults. Plastic bottles can be rightfully considered the perfect material for various crafts.

Every day we surrounds a lot of different plastic bottles - small and large, transparent and colored, from juice, kefir, yogurt, drinking water, sweet soda, bottles from creams and shampoos. At first glance, it is not clear what you can make with your own hands from a plastic bottle But it is worth only to apply a little fantasy, and you will create from unnecessary bottles useful things in the farm, and there may be whole masterpieces with your own hands.
Most people leave no extra plastic container in the house, they throw them immediately after use. They do it in vain! Even so unnecessary things, more like garbage, can be found truly worthy application. Most Famous and popular now type of craft - This is the manufacture of colors from girlfriend. For this, old threads and flower pots, kitchen utensils can be used. We offer you to do plastic flowers From unnecessary bottles, the master class in their manufacture is located below.

From ordinary plastic bottles you can make unique bright flowers that will conquer the heart of your guests, you can make decorations for the garden, which are not afraid of bad weather and strong wind. To create masterpieces you will need only scissors and a little material for decoration - paint, wire. Mostthe main thing in creating crafts - This is your fantasy and creative start.

So, what can be done with your own hands from a plastic bottle ? I suggest to start with sunflowers, these flowers look very impressive, and their creation will not take much time. To begin with, cut large petals from plastic bottles, similar to sunflower petals. Color them acrylic paint or paint from the canister from two sides.

After a complete drying of paint, do at the base of the holes of the hole, with whichpetals are bonded in flowers. Now you need to make the stem of our sunflower and core. Rodyshko bottles and its bends are perfect for making a midfielder. Stems are well obtained from rigid metal rods. Such magnificent plastic flowers like sunflowers will effectively look in the composition with adding toy bees, pots and other accessories.

We make flowers from a plastic bottle (master class with a photo)

Flowers from plastic bottles with their own hands are most often used to decorate the garden plot. Plastic is ideal for these purposes - it is durable, does not fade, no moisture and wind is afraid. Often you can see crafts from plastic bottles which are very harp-like. Even from afar it is clear that the flowers are made of plastic bottles, because they look harp and not careful.

Some masters are trying to save the situation and paint the petals of paint, but it does not always help it. Other craftsmen choose hard bottles for crafts , for example, shampoos, creams, domestic products or from milk. Such plastic bottles are made of more dense material and have different colors that are ideally suited to create flower arrangements with their own hands. You will only have to choose the right bottle, cut the items and bore them. Such flowers from plastic bottles made by their own hands can really decorate your garden!

There are a large number of ways how to create flowers from plastic bottles with your own hands. Some of them allow you to create enough lush colors heads, which will look beautiful in any situation. Here is one of the most affordable techniques.
Prepare plastic strips with a width of 4 to 7 centimeters, cutting the bottle to the same parts. At one edge of the bands, create a wave edge with scissors, there will be petals of crafts.

Spend the edge with petals over fire, do not melt plastic - It is enough just to heat it. Heated petals move to the desired side. Processed bands collect in a stack, forming a billet of a flower. The more strips are used, the stringener will be a flower. It can be copped with wire or using hot sewers. Among the lush petals, both types of fastening will be invisible. You can decorate the core of the flower using the plug from the plastic bottle.

Chrysanthemums and others plastic Bottle Flowers - We present a master class with a photo.
For the manufacture of such flowers, the pre-bottles must be painted in different colors. Next of bottles cut a lot of plastic thin strips. After that, collect these strips into the bundle and insert into the neck from the cut bottle. So the flower will be kept stronger. Fat metal wire, tree branch or metal rod can be used as a stem. Stemcrafts can be painted paint in suitable color or wrap cloth, paper, color film.

After the flower is assembled and inserted into the core, put it with the petals with a pencil or a knife. Just stretch each petal from an unpainted side. It will give the curly of your chrysanthemum.

Flowers from plastic bottle madeusing the presented master class with a photo , It will be impressive and will decorate your garden plot. After several trial works, you will get the necessary skill and you can create a variety of flowers, the main thing to understand the principle for which work is built.

How to make a decorative flower of plastic bottles (photo and master class)

The most beautiful flowers are created from plastic bottles when you have enough material and you are not trying to save on it. Decoration of the country or garden plot means using fabulous and fantastic motifs. For example, large and bright flowers who do not even exist in the rainforest.

Such colors from plastic bottles can be created using large bottles of drinking water. Please note that make a flower from a large plastic bottle with your own hands more difficult, as the material will be harder to cut. Use the help of surrounding men or use large scissors.

What to do from large plastic bottles ? Let's start with the manufacture of petals with your own hands. The most perfect option is 1 flower of 1 large bottle. In this case, cut the upper part, where the neck is located. Next, cut the remaining part of the bottle on the petals, simply giving them a rounded form. The bottom is conveniently suitable for fixing the stamens.

In the event that your fantasy requires a giant flower from a plastic bottle, then cut down on the petals of 2-3 large bottles. At the bottom of each petal leave a small part from the bottom of the bottle. This will allow conveniently fastening the petals when drawing up a flower . Just stretch the wire through the holes in the bottom. Heat the petals over fire and make bends. Observe care not to burn. The bends are conveniently formed using a wooden line or with a branch.

To plastic Bottles Flowers I looked realistic, I propose to make stamens.
To do this, it is better to use soft and flexible bottles with a capacity of 1.5-2 liters. Cut the neck and the bottom of such a bottle, then cut the workpiece on thin strips, but not reaching the edge of a couple of centimeters. Roll into the chopped workpiece - you have a great bunch of stamens.

Now you know that you canmake plastic bottles for decorating garden plot . In order for the flowers to look even more effectively, you can paint them. The aerosol paint is ideal in the cannon or acrylic paint. It is better color non-finished flower , And every blank at the slicer stage.

Master class on the manufacture of chamomile from plastic bottles with photos

The technology of manufacturing colors from plastic bottles is extremely simple - containers are cut into parts, then fasten with wire. So you can get stems, leaves, flower petals. You can go a little differently and make a functional porridge in the form of a flower using only one bottle. Crafts from plastic bottles in the form of chamomile-kashpo Created in 5-10 minutes. Work is quickly moving due to the fact that there is no need to fasten anything.

Chamomile is better made of white plastic bottles. Well suits both bottles of milk, kefir, so from under detergents. If you have no bottle of white plastic at home, you can take any other bottle, and then paint it into the desired color. Chamomile from a white plastic bottle in the photo will look like a real.

Let's start with the drawing flower sketch by felt-tip on a bottle. Donyshko will play the role of a pot for a pot with a plant, leave it as deep as possible, but do not forget about the chamomile petals. To start cutting, do a hot nail orknife in a bottle of hole , then cut the plastic with sharp scissors for the previously applied lines.

Chamomile from plastic bottles Move quickly and simple. Cut the bulk of the bottle on narrow petals, insertbright middle of a flower (for example, a plug from another bottle), in the neck. The main stage of the creation of porridge is complete. You can use it under a pot with any lively plant.

Chamomile from a plastic bottle will appropriately look at the photo, and in real life. Suchflowers It is convenient to use to quickly decorate veranda, flowerbeds, lawn.

Lily of a plastic bottle (photo)

Flowers of lilies from plastic bottles are ideal for making crafts for garden plot or for giving. You will need white or blue plastic bottles. Dairy bottles are suitable for white lilion boutons. If there is no plastic suitable color You can paint the existing acrylic paint tanks. With dimensions, everything is simple - the greater the bell, the more bottle we need.

To make lily of the plastic bottle do it yourselfYou will need to cut a bottle across. The bell will be created from the top of it with a plug. It will only remain cut the petals, give them a beautiful form, bend and make volumetric. To give additional order, you can heat the petals on fire and give them a more realistic form.

So that Lily of the plastic bottle in the photo looked like a real, fasten it on the plug. Do openings in traffic jams, stretch through a thin wire. Then tie a flower with a branch of this wire. Bucket is the most convenient to make everything from metal plates. To make a twist look likeon a real flower stem , Cut the green bottle with a thin plastic spiral. Watch this spiral twist and hold it over fire. When plastic melts - your branch is ready. You can hang on her bells.

When you learn to make the valley from a plastic bottle with your own hands, you can create a tulip along the same technology. Manufacture of several billets of flowers , You can insert them into each other and get terry flowers.

How the water lily of plastic bottles is made (MK with photos)

Wonderful and unusual plastic flowers can be made not from classic round bottles, but from flat bottles, for example, like a shampoo. A great lily of the bottle is excellent Lily! Do not even be flexing the petals in order to give them the necessary form. It is enough just to cut the corner from the bottle, and there is already bending. In any case, you can refine the bends, heating plastic over fire.

To lily from a plastic bottle looked most effectively, you need to choose bright types of colors. For example, orange lilies will greatly revive your flowerub And make more funny any dark corner in the garden. Plus the lilies are that they are always easily recognized. Lilies from plastic bottles made with their own hands will not . One of the options for the location of such plastic lilies is the center of the flower beds of real Lily. Put real and plastic flowers ahead, it will give the flowerbed of uniqueness.

Lilies from plastic bottles Easy to create your own hands. To do this, you will need only a few bottles, metal wire, plastic tubes.

Lily from a plastic bottle is created like this: cut the top of the bottle - the neck with the plug. Then cut the pointed petals on the billets of the flower. In order to make bending, you can heat the crafts over fire. But make sure that the petals are not deformed from the excess heat. With the help of oil or acrylic paint paint the flower head in orange color. Attach the colors head to the stems using wire. Cut sharp and long leaves. If you are using plastic tubes for a stem, then make slots in them and insert the leaves. If for these purposes you are harvested with a metal rod, then screw the leaves with thin wire to the rod.

The above was described the basis of the manufacture of lily, but the Lilynik is famous for flowers with inflorescences. So we need to collect a whole bush from the harvested flowers. How to do it? Attach one flower to each stalk, and then three stems wrap together with scotch even insert into the tube.

In the embodiment of any ideas using plastic flowers, do not forget to compare your creation with pictures of real plants.

We go to decorate our garden on. I am sure that the water lily will look good in your garden. Water lily can be made not from plastic bottles, but from their fellows - disposable plastic spoons. It is created very simply - the petals in the form of spoons are ready. For the manufacture of large water lilies, prepare large spoons, a flower of small spoons is suitable for decorating an aquarium.

The first stage will be the manufacture of billets of plastic flowers. Separate the deep part of the spoon from the handle, the deep part is just a petal. Next, the process of collecting water lily can go differently.

One option is to heat the base of flower petals on fire and how to glue from each other. Stamens made of thinly sliced \u200b\u200byellow plastic Bottles are inserted inside. For this purpose, you can use the yellow wire or thick threads.

The second option is used if very large lily is assembled. First, the base is made, then the petals of water lily are attached to it. The base can be made of both cardboard, such as cardboard packaging from eggs. Soak the cardboard when it is soaked with water and swell, press it and scroll together. Add PVA glue and white gouache into this mass. Form the hemisphere, put it on a plastic plate. While the mass is still raw, stick in the circle of water lily petals, forming from spoons flower . Ready plastic flower attach to a leaf of green plastic.
Next article:

Our fantasy is truly limitless. To improve the garden, many different devices and crafts have long come up with, it would seem unsuitable for the use of items.

When the term of using a particular thing comes to an end, we often have it simply throw it away, although you can show your creative abilities and make the original craft, which will attract the attention of others and please the eyes for many years.

One of these items is a plastic bottle. Now let's talk how to use it for the manufacture of colors.

In recent years, gained great popularity, as it does not need to make a lot of time and effort.

Plus to everything, plastic container - Very affordable material that can be found in every home. Let's consider in more detail various options for performing colors from plastic bottles for giving.

Option number 1

To make such flowers as you see in the photo above, you need plastic bottles of different sizes, aerosol paints, scissors, as well as a little fantasy and diligence. You can cut lilies, sunflowers, binders, chamomile, hydrangea, cornflowers, valley or any other flowers at your discretion.

To make such, you must first prepare the source material. Bottles need to be thoroughly flushed and disconnect the labels from them.

Then, when they finally dried, you can start painting. First you do on a bottle of multi-colored stripes, depending on what flower in the end you want to get.

The last color will be a background, so they need to be covered with special care. The color of the material should be carried out in the open air, since the paint in the aerosol has toxic effect.

When paint dries, cut the bottles into two parts. At the same time, the sizes you choose, based on the final idea of \u200b\u200bthe flower. We get two separate blanks, from which and cut out flowers.

The composition of these colors will look very original with alive green plants.

Option number 2.

To make these beautiful flowers from plastic bottles do it yourselfYou need to take a few sheets of paper, scissors, candle, segment of unnecessary wire and, actually, plastic bottles.

Gently cut out of paper stencils for whites with small petals of colors. Take the bottle and from the middle side will cut the squares that will match the sizes cut earlier to the stencils.

After that, according to these most stencils, cut out of the prepared plastic blanks for the bunks. Each whisk must be pierced by sewing or Gypsy needle clearly in the center. All billets carefully treat the candle flame to give the desired petals shape.

After cutting the stencil and on it, a blank for a cup of a green bottle, also process it above the flame. Cut the middle part of the green plastic bottle in such a way that you have a strip, approximately 1 cm in width.

Take a hard wire having a plastic shell. Then carefully wate the plastic strip around it, softening it over the burning candle.

Release the edges of the wires from the plastic shell and in a descending order put on it a cup and whiskers, pressing them tightly to each other. To secure the wonners, undermine the end of the wire. Flower ready!