Samsung Galaxy S Duos 2 is the next generation of Samsung Galaxy S Duos. New Firmware update for Samsung Galaxy S Duos 2 has been released by Samsung. This is an official update released by Samsung. The details about the new update has been listed below. The firmware download links, and way to install the new firmware are also discuss below. Before going to update read the full post carefully.
dfdg Firmware Details
dfdg Downloads
dfdg Instructions
Samsung Galaxy S Duos 2 GT-S7582 is a branded smartphone running on Android 4.2. Here you will find out the characteristics, how to root or reset the settings, and you can also download firmware (for Odin, for example) and instructions for Samsung.
How to get a root for Samsung Galaxy S Duos 2 GT-S7582 see instructions below.
If the applications did not help, ask in the topic or use the full list of root utilities from the topic header.
»
Official firmware Android 4.2 [stock ROM file] -
Samsung Custom Firmware -
If a custom or official firmware for Samsung has not yet been added here, then create a topic on the forum, in the section, our specialists will promptly and free of charge help, incl. with backup and manuals. Just do not forget to write a review about your smartphone - this is extremely important. This page will also show the firmware for the Samsung Galaxy S Duos 2 GT-S7582. Please note that for this Samsung model, an individual ROM file is required, so you should not try firmware files from other devices.
What custom firmwares are there?
Samsung Smartphone Problems and Disadvantages and How to Fix Them?
Instructions on how to Hard Reset on Samsung Galaxy S Duos 2 GT-S7582 (factory reset). We recommend that you familiarize yourself with the visual guide, which is called on Android. ...
Reset codes (open the dialer and enter them).
Factory reset on Samsung Galaxy S Duos 2 GT-S7582 can be done in a very simple way:
How to reset your pattern if you have forgotten it and now you cannot unlock your Samsung smartphone. On the Galaxy S Duos 2 GT-S7582, the key or PIN can be removed in several ways. You can also remove the lock through a factory reset, the lock code will be deleted and disabled.
We have put together a detailed step-by-step instructions guide on how to install CM11 Android 4.4.2 KitKat custom firmware on Galaxy S Duos S7562. If you are used to installing custom ROMs on your Galaxy S Duos S7562, then this should not be any different for you.
However, for beginners, you need to root your Samsung Galaxy S Duos and install a custom recovery. Please Google that up if you are unsure and make sure you read the tutorial once before actually performing it on your device.
To Remember:
Complete Step-By-Step Instructions:
NOTE: Screenshots of the ClockworkMod Recovery may change as new versions are released.
Step 6 - Once you are in ClockworkMod Recovery, select perform a full data wipe by selecting “wipe data / factory reset” as shown below. Use the Power button to select everything while in the Recovery Mode.
Step 7 - Then, perform a cache wipe by selecting “wipe cache partition” as you can see in the image below.
Step 8 - Now this is optional, but it is recommended to perform a wipe of your dalvik cache as well. You will not get into boot loops or any other errors. From CWM recovery, go to ‘advanced’ and then select “wipe dalvik cache”.
Step 9 - Then go back to the main recovery screen and select “install zip from SD card”.
Step 10 - Now select “choose zip from sdcard”. Using your volume keys, navigate to the Android 4.4.2 ROM zip file that you copied to your SD card and select it using the Power button. Confirm the installation on the next screen and the installation procedure should start now.
Google Apps: Repeat the above step for the Gapps zip file as well and install it on your phone.
Step 11 - After the installation completes, go to “+++++ Go Back +++++” and reboot the phone by selecting “ reboot system now”From the recovery menu as show below.
Your Galaxy S Duos S7562 will boot now and it might take about 5 minutes to boot on your first time. So, please wait.
That’s it! Your Galaxy S Duos should now have CM11 Android 4.4.2 KitKat custom ROM installed on your phone! Go to Settings> About phone to verify.
Hit +1 or LIKE to thank us!
If you run into any problems, feel free to drop us a comment on our Facebook, Google+ or Twitter and we will reply you back ASAP with the fix or the solution to your problem.
He lives on everything Android; has countless devices, apps and games to play with everyday. Currently serving as the Chief Editor at Team Android.
Hello everyone, there hasn't been an article on Android for a long time. The other day they brought me a Samsung GT-S7562 Galaxy S DUOS smartphone with a request to flash this model. I don't know what exactly was done with it, but the firmware has gone unambiguously. The request was to install the usual - stock firmware and, if possible, install CWM-Recovery and get root-rights.
You can read what Root rights are and how you can get them for Android devices. And so, I think it's time to start the firmware process.
The first step is to install the driver. Open the SAMSUNG_USB_Driver_for_Mobile_Phones archive and run the exe file. In the installation wizard window, click the "Next" button.
Then select the country and language, tap on the button "Next", "Install", "Finish".
This completes the driver installation. Run the Odin3 1.87 program. In the opened window of the program, click on the PDA button and select the firmware with the extension ".md5". A check mark ( Leave the rest of the settings and checkboxes unchanged).
Further, on the switched off smartphone, you must simultaneously hold down the Vol.Down "Volume Down" button, the Home button "Central button", then press the Power button "On / Off button". After the smart vibrates, release all buttons. A warning window will appear.
Smart is ready for flashing. We connect the phone to the computer via a USB cable. In the Odin3 1.87 program, the port number on a yellow background will appear in the ID: COM column, the program has identified the phone. Then press the START button. The firmware process will begin.
After the end of the firmware, the smart will reboot. Disconnect your phone from your PC. Close the Odin3 1.87 program.
Run the Odin3 1.87 program. Click on the PDA button and select the CWM-Recovery file with the ".tar" extension, download from here.
DO NOT UNPACK ANYTHING
A check mark ( Leave the rest of the settings unchanged).
Further, on the switched off smartphone, you must simultaneously hold down the Vol.Down "Volume Down" button, the Home button "Central button", then press the Power button "On / Off button". After the smart vibrates, release all buttons.
Connect your phone to PC via USB cable. The Odin3 1.87 program will detect the smart, the port number will appear in the ID: COM column on a yellow background at the top left. Press the START button. The process of flashing CWM-Recovery will begin, which will take no more than two minutes. The PASS inscription on a green background indicates that the firmware process has been completed successfully. Disconnect the smart from the computer.
First of all, a memory card must be installed on the phone. On an external SD card, you need to upload the CWM-Superuser 3.1.3 file, which can be downloaded here.
DO NOT UNPACK ANYTHING
We cut off the smart, on the switched off phone, hold down Vol.Down "Volume down", Vol.Up "Volume up", Home "Central button", and then turn on the phone with the Power button "on / off button". After the device vibrates, release all buttons.
CWM-Recovery will start.
I draw your attention to the fact that there should be written CWM-based Recovery, and not Android system recovery<3e>.
To move to the CWM-Recovery menu, use the Vol.Down “Volume down” and Vol.Up “Volume up” keys, confirm the selected action with the Home button “Central button”, to return back, the Power button “on / off button”. I advise you to make a full Backup, for this go to the "Backup and restore" menu and select "Backup".
Then we go back, click "install zip from sdcard". Next, tap "choose zip from sdcard", find the file CWM-Superuser-3.1.3.zip. Then select "Yes-Install CWM-Superuser-3.1.3.zip" and confirm with the Home button. After installing CWM-Superuser, go back and select "reboot system now". The machine will reboot.
If CWM-Recovery is not useful to you in the future, I advise you to flash Stock-Recovery which lies here, this will also remove the yellow triangle when the phone is turned on from the Samsung lettering. Sew as well as CWM-Recovery, using the Odin3 1.87 program. Something like that.
Sincerely,
For all owners of a Samsung Galaxy S Duos 2 S7582 smartphone who want to quickly root, this is a simple step-by-step instruction.
For those who have just become a beginner or are not an expert in the huge world of Android and are not particularly familiar with the concept of how - Root Android, and also why it is needed, what can be done after obtaining Root rights or how to get rid of them later if they are no longer needed, all this can be found in the detailed article -!
There are no "left" links or unnecessary actions in this article! If you really need Root Rights, then read carefully and follow it step by step, this is a guarantee that you will do everything right! This article on obtaining Root rights is divided into two parts: The first part is Required components and conditions, the second part is Instructions how to get root rights using the received files and programs. If, in the process of getting root rights, Android constantly reboots or in the process of eternal loading (it happens extremely rarely, but still), then it's worth it. Now let's get down to getting Root rights!
Android manufacturers sometimes release new firmware on which it is not possible to get Root using one of the proposed methods, if there are other alternative methods in the article, try them. Doesn't it work all the same? Indicate the Android version and the firmware version in the comments (you shouldn't write spiteful shit comments, you won't get it for yourself or others). Android hangs (does not load), read and re-read from the very FIRST paragraph, all the necessary links in the article are present!
For Method 1
1. Computer or laptop
2. MicroUSB cable
3. Charged smartphone at least 50%
4. Smartphone flasher Samung - Odin
5. Download and install the Samsung driver on your computer
For Method 2
1. Install Android driver
4. Charged smartphone Samsung Galaxy S Duos 2 at least 50%
5. Original, undamaged Micro-USB cable
Method 1
1. Rename the UPDATE-SuperSU.zip file to update.zip and move it to the memory card
2. Reboot the smartphone into Bootloader mode and launch Odin
3. REMOVE the check mark in ODIN - AUTO REBOOT
4. Flash Recovery. NOW CAREFULLY! After Odin flashed Recovery, disconnect the smartphone from the PC and take out the battery and insert back
5. Translate Android in the Recovery menu.If the smartphone started just reboot then all down the drain and it is necessary repeat step 2-5 again
6. Install file update.zip from the Recovery menu
7. Reboot smartphone Samsung Galaxy S Duos 2 S7582
Root rights received!
Method 2
1. Run Vroot
2. Wait until the program detects your Samsung Galaxy S Duos 2
3. Press the green "Root" button
4. After a couple of minutes, Root rights are received
5 To provide the application root, pop-up window right click
6. If you don't like Chinese characters, then you should consider replacing the application Kingroot on the SuperSu